Epson SC-F7100 Series User Manual page 150

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
D
Loosen the roll holder fixing screws and adjust
the roll holders so that the distance between the
two is wider than the roll core.
c
Important:
If the right holder handle shaft is not visible,
rotate the handle as shown in the illustration
below until it stops.
E
Tighten the roll holder fixing screw to align the
left roll holder with the position of dotted line.
Appendix
F
Pass the adjustment paper through the roll core.
G
Insert the roll core into the left roll holder. Insert
the right roll holder into the roll core, and then
tighten the roll holder fixing screw.
H
Rotate the handle until part A in the illustration
below is fully inserted.
150