Epson SC-F7100 Series User Manual page 55

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
c
Important:
❏ Do not use a roll core with a deformed interior.
If the roll core holder slips, the media may be
taken up incorrectly.
❏ We recommend using a take-up roll core with
the same width as the media. If a take-up roll
core of a different width is used, the take-up
roll core may bend, and the media will be taken
up incorrectly.
Attaching the roll core
A
After confirming that the media is loaded
correctly, press the d button to feed the media as
far as the Auto Take-up Reel Unit roll core
holder.
c
Important:
Always press the d button to feed the media as
far as the roll core holder. If the media is
pulled by hand, the media may twist during
take-up.
Basic Operations
B
Loosen the roll core holder locking screws and
adjust the roll core holders so that the distance
between the two is wider than the media.
Center the roll supports between the roll holders.
C
Align the right roll core holder with the right
edge of the media and tighten the locking screw.
D
Insert the roll core onto the right holder.
55