Replacing The Media Holding Plates - Epson SC-S70600 series User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Wait until ink stops dripping from the bottom
surface of the flashing pad. Remove the pad and
then place it in the metal tray.
c
Important:
Leave the used flushing pad that has been
removed on the metal tray until it is disposed
of. If such a part is directly placed on the
printer, it may leave stains that may be
difficult to remove due to the characteristics of
the ink.
Maintenance
D
Insert a new flushing pad.
Insert the two hooks on the flushing pad into the
slots as shown and press the tab down until the
pad clicks into place.
E
Close the maintenance cover, and then close the
setup menu.
If the Z button is pressed once, the wiper moves
to the inner side. If the Z button is pressed
again, the print head returns to its normal
position and the menu closes.
Disposal of used flushing padsU
page 126
Replacing the media holding
plates
When the media holding plates supplied with the
printer are deformed or damaged, be sure to replace
them with new ones.
Media holding plates available on the printer
"Options and Consumable Products" on
U
page 171
c
Important:
❏ If a deformed or damaged media holding plate
continues to be used, it may result in damage
to the print head.
❏ When replacing the insertable media holding
plates, replace both the right and left plates
with the sliding media holding plates.
123
"Disposal" on