Notes When Not Using The Printer - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
❏ Make sure the work space is kept clean. If dust or
lint enter into the printer, it could damage the
printer or clog the print head nozzles.
❏ Avoid using the printer in locations with heat
sources or that are exposed to direct draughts from
ventilators or air conditioners. The print head
nozzles could dry out and clog.
❏ Use the printer in a location that is sufficiently
ventilated.
❏ Do not bend or tug the waste ink tube. Ink could
spill inside or around the printer.
❏ Maintenance such as cleaning and replacement
must be performed according to usage frequency or
at recommended intervals. Failure to perform
regular maintenance could cause print quality to
decline. In the absence of the appropriate
maintenance, continued use could damage the
print head.
"When to Perform Various Maintenance
U
Operations" on page 74
❏ The print head may not be capped (the print head
may not return to the right side) if the printer is
turned off when the media is jammed or an error
has occurred. Capping is a function for
automatically covering the print head with a cap
(lid) to prevent the print head from drying out. In
this case, turn on the power and wait a while until
capping is performed automatically.
❏ When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
❏ The print head is automatically cleaned at a fixed
interval after printing to keep the nozzle from
clogging.
Be sure that the Waste Ink Bottle is placed whenever
the printer is on.
"Printer Setup Menu" on page 115
U
❏ As well as being expended during printing, ink is
used during head cleaning and other maintenance
required to keep the print head in working order.
Introduction
❏ To ensure your printouts have a stable coloring,
maintain a constant room temperature of 15 to
25˚C.
Notes When Not Using the
Printer
If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you may
not be able to print properly the next time it is used.
❏ If you do not print for a long time, the print head
nozzles may become clogged. Turn the printer on at
least once every two weeks to prevent the print head
clogging.
When the printer is turned on, head cleaning is
performed automatically. Do not turn the printer
off until cleaning is complete.
Leaving the printer for too long without turning it
on may result in a malfunction. In such a case, the
repair work will also be charged.
❏ If you will not be using the printer for more than 2
weeks, maintenance must be performed by a service
engineer before and after this period. This
maintenance work will be charged.
Note that even if proper maintenance has been
done before leaving the printer for a long time,
repair may be necessary when doing maintenance
for reusing the printer, depending on the period
and conditions of storage. In such a case, the repair
work will also be charged.
Contact your dealer or Epson Support.
❏ The pressure rollers may crease media left in the
printer. The media may also become wavy or
curled, causing jams or resulting in the media
coming into contact with the print head. Remove
the media before putting the printer in storage.
❏ Store the printer after confirming that the print
head has been capped (the print head is positioned
at the far right). If the print head is left uncapped for
a long time, the print quality may decline.
Note:
If the print head is not capped, turn the printer on, and
then turn it off.
24