Epson SC-F7100 Series User Manual page 156

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
H
Keep the adjustment paper taut and check the
positions of the white line on the platen and the
line drawn in Step 6.
If the drawn line and white line are misaligned as
shown in the illustration below, proceed to Step
9. If they are aligned, proceed to Step 10.
Appendix
I
While checking the state of the two lines on the
front side of the printer, use the hexagon wrench
(large) to adjust the screw so that the drawn line
aligns with the position of the dotted line.
If the drawn line is below the white line, rotate the
adjustment screw clockwise. If the drawn line is
above the white line, rotate the adjustment screw
counterclockwise. One turn of the screw moves
the line about 1 mm.
J
Use the hexagon wrench (large) to tighten and
firmly secure the 4 screws.
156