Replacing The Media Holding Plates - Epson SureColor S30675 User Manual

Insert the two hooks on the flushing pad into the slots as shown and press the tab down
until the pad clicks into place.
5. Close the maintenance cover. Then close the setup menu.
If the Z button is pressed once, the wiper moves to the inner side. If the Z button is
pressed again, the print head returns to its normal position and the menu closes.
For disposal of used flushing pads, see "Disposal of Used Consumables" on page 179.

Replacing the Media Holding Plates

When the media holding plates supplied with the printer are deformed or damaged, be sure
to replace them with new ones. See "Options and Consumable Products" on page 234.
Important:
If a deformed or damaged media holding plate continues to be used, it may result in damage to
the print head.
1. Remove media and press the P button to turn the printer off. See "Replacing and
Removing Media" on page 87.
2. Open the left maintenance cover and front cover.
3. Remove the target media holding plate.
174
Maintenance