Disposing Of Waste Ink - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Except for High Density Black ink
For High Density Black ink
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into
contact with the ink inlet cap when pulling it
out, the cap could be damaged.
M
Close the slider ink inlet cover.
Maintenance

Disposing of Waste Ink

Be sure to replace the Waste Ink Bottle when the
following message is displayed in the control panel.
❏ Prepare empty waste ink bottle.
❏ Replace waste ink bottle and press Z.
Leave the waste ink in the Waste Ink Bottle for disposal;
do not transfer it to another container.
c
Important:
Never remove the Waste Ink Bottle while the head is
being cleaning or a print operation is in progress.
Failure to observe this precaution could cause
waste ink to leak.
Waste Ink Counter
The printer uses the waste ink counter to track waste ink
and displays a message when the counter reaches the
warning level. If you follow the message instructions
and replace the Waste Ink Bottle, the waste ink counter
is cleared automatically.
If you replace the Waste Ink Bottle before being
prompted by a message, run the Waste Ink Counter
option in the Maintenance menu after replacement.
"The Maintenance Menu" on page 116
U
c
Important:
If you replace the Waste Ink Bottle before being
prompted by a message, always clear the waste ink
counter. Otherwise, the replacement interval for
the Waste Ink Bottle will no longer be notified
correctly from the next message.
Replacing the Waste Ink Bottle
Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
"Precautions Regarding Maintenance" on page 76
U
91