Printer Setup Menu - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide

Printer Setup Menu

is the default setting.
Setting items and setting values marked with asterisks indicate the following printer models.
*1: SC-F7200 and SC-F7100 Series only; *2: SC-F7000 Series only; *3 SC-F7200 Series only; *4 SC-F7100 and SC-F7000
Series only
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
*3
Margin Between Pages
Media Size Check
Media End Check
Media Skew Check
*3
Media End Option
Using the Control Panel Menu
Parameter Explanation
3 to 25mm (0.12 to Choose the width of the right margin when media is loaded in the printer.
1.00inch) See the following for more information.
"Printable Area" on page 72
U
3 to 25mm (0.12 to Choose the width of the left margin when media is loaded in the printer.
1.00inch) See the following for more information.
"Printable Area" on page 72
U
0 to 800 mm (0.00 Adjust this parameter if you want to print from the near center of the
to 32.00 inch) media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
"Printable Area" on page 72
U
Normal Allows you to reduce the margin between pages. Even after making
adjustments, the size of the margin may change depending on the media
No Margin
and usage environment.
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
"Printable Area" on page 72
U
On Choose whether the printer automatically detects (On), or does not
automatically detect (Off),the edges of the media when the media is
Off
loaded. We generally recommend to operate with this setting set to On.
Try Off if the printer displays a Media Size Error when the media is
correctly loaded. Note, however, that the printer may print beyond the
edges of the media when Off is selected. Ink used outside the edges of the
media will stain the inside of the printer.
Changed settings are reflected when the media is re-loaded.
On Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
Off
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
Off
most circumstances, as skewed media may cause the printer to jam.
Continue Select whether or not (Continue/Stop Printing) to print the remaining
data after replacement.
Stop Printing
115