Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Before cleaning
After cleaning
Dried and adhered ink, lint, and dust are cleanly
removed.
If any ink, lint, or dust remain, repeat steps 6 and
7.
c
Important:
If stains are wiped off while the surface of the
print head remains dried, the print head may
be damaged. If the surface is dried, return to
Step 5 to apply ink cleaner.
H
Wipe stains off the cleaning wiper, and store it in
a location that is not exposed to dust and away
from direct sunlight.
I
Close the left maintenance cover.
Next, clean the wiper and attachment point.
Maintenance
Cleaning Wiper and Attachment
Point
A
Open the right maintenance cover.
B
Remove the wiper.
Holding the wiper by the attachment point, tilt it
left and lift it out.
C
Dampen a new cleaning stick (wide) with ink
cleaner.
"Using Ink Cleaner" on page 77
U
D
Clean the front and back of the wiper with the
cleaning stick (wide).
80
Advertisement
Table of Contents
