Epson SC-F7100 Series User Manual page 35

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
O
Go to the front of the printer and open the front
cover.
P
Hold the center of the media and raise the media
loading lever.
Q
Pull the media straight forward to the leading
edge of the after heater.
R
Close the front cover.
S
Rewind the leading edge of the media to the front
cover.
For media with the printable side out, press the u
button. For media with the printable side in,
press the d button.
Basic Operations
Confirm that the media was fed straight with the
media straight and taut.
Note:
We recommend using the r button on the control
panel to set Media Suction to 2. The media is
rewound straight.
T
Open the front cover.
U
Lower the media loading lever to hold the media
in place.
35