Epson SC-F7100 Series User Manual page 146

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
I
While checking the scale of film a on the front
side of the printer, use the large hexagon wrench
for adjustment.
If the adjustment screw is turned clockwise, the
scale moves back. If the adjustment screw is
turned counterclockwise, the scale moves
towards you. One turn of the screw moves the
line about 1 mm.
J
Use the large hexagon wrench to firmly secure
the 4 screws.
Appendix
K
At the rear of the printer, remove the
counterweight attached to film a.
L
Pull out film a from the printer.
M
Bring film a to the left side of film b.
Pass the lead edge of film a by the front of the
media guide bar and then insert it into the
printer.
146