Using The Supplied Software; Contents Of The Software Disc - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide

Using the Supplied Software

Contents of the Software Disc

The following applications are available on the supplied software disk. Install as required.
For information about these applications, see the Network Guide (pdf) or the on-line help for the application in
question.
Note:
❏ The supplied disc does not contain printer drivers. A software RIP is required for printing. Software not on the supplied
software disc (including software RIPs for this printer) is available from the Epson website.
❏ The latest applications can be downloaded from the Epson website.
For Windows
Software Name
EPSON LFP Remote Panel
*
2
Epson Driver and Utilities
Epson Network Utilities
EpsonNet Config
* Only for the SC-F7100 and SC-F7000 Series.
For Mac
Software Name
EPSON LFP Remote Panel
*
2
Epson Network Utilities
EpsonNet Config
* Only for the SC-F7100 and SC-F7000 Series.
Introduction
Summary
EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy media settings
bank created in the printer's setup menu to a computer.
The latest applications can be downloaded from the Epson website.
"Starting EPSON LFP Remote Panel 2" on page 28
U
"Exiting EPSON LFP Remote Panel 2" on page 29
U
Epson communications drivers (the EPSON SC-F7200 Series Comm Driver, EPSON SC-F7100 Series
Comm Driver, or EPSON SC-F7000 Series Comm Driver) are installed.
The Epson communications driver is required to copy media settings using EPSON LFP Remote
Panel 2. It is not a printer driver. In addition, the software RIP may not display printer status if the
Epson communications driver is not installed when the printer is connected to a computer via
USB. See the software RIP documentation for more information on the status display.
Install and launch a wizard that will help you enter IP addresses for a simple network connection.
With this software, you can configure various network settings for the printer from your computer.
This is useful as it allows you to enter addresses and names using the keyboard.
Summary
EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy media settings
bank created in the printer's setup menu to a computer.
The latest applications can be downloaded from the Epson website.
"Starting EPSON LFP Remote Panel 2" on page 28
U
"Exiting EPSON LFP Remote Panel 2" on page 29
U
Install and launch a wizard that will help you enter IP addresses for a simple network connection.
With this software, you can configure various network settings for the printer from your computer.
This is useful as it allows you to enter addresses and names using the keyboard.
27