Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
F
Flip the Auto switch to
Removing the Take-up Roll
(SC-F7200/SC-F7100 Series)
This section describes how to remove media from the
take-up reel.
!
Caution:
❏ Because the media is heavy, it should not be
carried by one person. When loading or
removing the media, use at least two persons.
❏ Perform the following procedure to properly
remove the take-up roll.
Injury may occur if the take-up roll falls.
Basic Operations
A
.
B
C
D
53
Set the Auto switch to Off.
Cut the media and roll the cut end onto the
take-up reel.
"Cutting Media" on page 44
U
Rotate the handle of the left roll core holder.
To prevent the media from sliding off the roll,
support the roll at its left end.
Advertisement
Table of Contents
