Hummer H3T Owner's Manual page 301

04AKENG59_H3T.fm Page 301 Thursday, July 31, 2008 12:07 PM
To check and adjust tire
pressure:
You cannot tell if your tires are
properly inflated simply by looking
at them. Radial tires may look
properly inflated even when they
are underinflated.
For tire pressure inspection, the
use of a quality pocket tire
pressure gage is recommended.
1. Remove the valve cap from
the tire valve stem.
2. Press the tire gage firmly onto
the valve to get a pressure
measurement.
3. If the pressure is low, add air
until you reach the
recommended pressure.
If you overfill the tire, release
air by pushing on the metal
stem in the center of the tire
valve.
Section 4
4. Recheck the tire pressure.
5. Be sure to put the valve caps
back on the valve stems. They
help prevent leaks by keeping
out dirt and moisture.
301 . . .
–
–
–
–