Hummer H3T Owner's Manual page 105

04AKENG59_H3T.fm Page 105 Thursday, July 31, 2008 12:07 PM
To turn off cruise control and erase
the set speed memory, do the
following:
• Move the cruise control switch
to the left, "off" position.
or
• Turn off the ignition.
To Go Back to Your Set Speed
If you have temporarily turned off
cruise control without erasing the
set speed memory, do the follow-
ing to re-engage cruise control:
• Once you're going about
40 km/h (25 mph) or more,
you can move the cruise switch
briefly to the right, resume/
accelerate position. You'll go
right back up to your chosen
speed and stay there.
Section 1
When you move the switch to the
resume/accelerate position to
return to your chosen speed, don't
hold the switch there. If you hold
it, the vehicle will accelerate and
continue to gain speed. It will keep
going faster until you release the
switch or apply the brake.
105 . . .
–