Hummer H3T Owner's Manual page 153

04AKENG59_H3T.fm Page 153 Thursday, July 31, 2008 12:07 PM
4. Push the latch plate into the
buckle until it clicks.
Be sure to insert the correct
latch plate into the appropri-
ate buckle.
Make sure the release button
on the buckle faces upward or
outward.
5. If your seating position is
equipped with a shoulder belt
height adjuster, adjust the
shoulder belt height.
See "Shoulder Belt Height Ad-
juster" later in this section.
6. Pull on the shoulder section to
adjust the lap fit.
For smaller occupants, you
may need to pull the stitching
on the lap belt through the
latch plate to fully tighten the
belt.
The safety belt locks if there is a
sudden stop or crash.
Section 2
To unlatch the belt:
• Push the button on the buckle.
When a safety belt is not in use,
slide the latch plate up the safety
belt webbing. The latch plate
should rest on the safety belt
stitching, near the guide loop.
153 . . .
–
–