Printer Setup - Lexmark MX910de Service Manual

PRINTER SETUP

Defaults
Warning—Potential Damage: Modifying printer setting defaults restores the NVRAM space to its factory settings.
This setting determines whether the printer uses the U.S. or Non-U.S. factory default value for the following settings:
Printer default values
Paper Sizes setting in the General Settings menu
Default Paper Size (paper feeding sources which do not
have hardware size sensing capabilities)
Default Envelope Size (envelope feeding sources which do
not have hardware size sensing capability)
Fax Paper Size
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
1
Enter the Diagnostics menu, and then navigate to:
PRINTER SETUP > Defaults
2
Select a default value.
3
Apply the changes.
Printed Page Count
This setting gauges the amount of usage on the printer. The value of the Printed Page Count setting equals the value
of the Picked Sides meter. After all print tests are completed, the value resets to zero.
Enter the Diagnostics menu, and then navigate to:
PRINTER SETUP > Printed Page Count
Note: The value of the setting cannot be changed manually.
Permanent Page Count (Perm page count)
This setting indicates the number of pages that are printed. After all print tests are completed, the value resets to zero.
Enter the Diagnostics menu, and then navigate to:
PRINTER SETUP > Perm Page Count
Note: The Permanent Page Count value cannot be reset.
Processor ID
This setting indicates the ID of the processor on the controller board.
Enter the Diagnostics menu, and then navigate to:
U.S. value
U.S.
Letter
10 Envelope
Letter
PC-8
437
Inches
Service menus
224
Non-U.S. value
Metric
A4
DL Envelope
A4
PC-850
850
Millimeters
7421