Table of Contents
Advertisement
Action
Step 12
Observe the MPF lift plate clutch.
Is it working properly?
Step 13
a
Reseat the MPF lift plate clutch cable.
b
Check the cable for damage, and replace if necessary.
Does the problem remain?
Step 14
Check the MPF lift plate clutch for damage, and replace if necessary.
Does the problem remain?
Step 15
Check the sensor (MPF lift plate).
Is it free of damage?
Step 16
Enter the Diagnostics menu, and then navigate to:
SENSOR TESTS > PRINTER SENSOR TESTS > MPF lift plate position
Does the sensor status change while toggling the sensor?
Step 17
a
Reseat the MPF lift plate sensor cable.
b
Check the cable for damage, and replace if necessary.
Does the problem remain?
Step 18
Replace the sensor (MPF lift plate). See
on page
303.
Does the problem remain?
Step 19
Enter the Diagnostics menu, and then navigate to:
MOTOR TESTS > PRINTER MOTOR TESTS > Paper feed
Does the motor run?
Step 20
a
Reseat the feed motor cable.
b
Check the cable for damage, and replace if necessary.
Does the problem remain?
"Sensor (MPF lift plate) removal"
Diagnostic information
70
Yes
No
Go to step 14.
Go to step 13.
Go to step 14.
The problem is solved.
Go to step 15.
The problem is solved.
Go to step 16.
Go to step 18.
Go to step 19.
Go to step 17.
Go to step 18.
The problem is solved.
Go to step 19.
The problem is solved.
Go to step 23.
Go to step 20.
Go to step 21.
The problem is solved.
7421
Advertisement
Table of Contents
