Sensor (Scanner Lamp Home) Removal - Lexmark MX910de Service Manual

4
Remove the speaker frame.
5
Remove the control panel. See
6
Remove the control panel base. See
7
Disconnect the sensor cable (A), and then remove the screw (B) to remove the sensor.

Sensor (scanner lamp home) removal

1
Remove the ADF assembly. See
2
Remove the scanner rear cover. See
"Control panel removal" on page
"Control panel base removal" on page
"ADF assembly removal" on page
"Scanner rear cover removal" on page
Repair information
421
341.
440.
391.
430.
7421