ADF top cover assembly removal
1
Remove the ADF front cover. See
2
Remove the ADF rear cover. See
3
Disconnect the J14 cable from the ADF controller board.
4
Remove the ground screw (A) from the rear of the ADF top cover assembly.
5
Remove the screws (B) (C) from the shafts on the front and rear of the ADF top cover assembly, and then remove
the shaft.
6
Remove the ADF top cover assembly.
ADF top cover removal
1
Remove the ADF front cover. See
2
Remove the ADF rear cover. See
3
Remove the ADF top cover assembly. See
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF top cover assembly removal" on page
Repair information
413
402.
410.
402.
410.
413.
7421