Mismatched Paper Size Service Check - Lexmark MX910de Service Manual

Action
Step 2
a
Make sure that the cartridge or photoconductor is properly installed.
b
Make sure that the cartridge or photoconductor cables are properly
connected.
Does the problem remain?
Step 3
Check the cartridge or photoconductor contacts for damage, and replace
if necessary.
Does the problem remain?
Step 4
Check the controller board pins for damage, and replace if necessary. See
"Controller board removal" on page
Does the problem remain?

Mismatched paper size service check

Action
Step 1
a
Make sure that the tray paper length and tray paper width guides are
properly installed.
b
Check the guides for wear or damage, and replace if necessary.
Does the problem remain?
Step 2
Check the paper width and paper length sensor actuators for damage, and
replace if necessary.
Does the problem remain?
Step 3
a
Reseat the paper width and paper length sensor cables.
b
Check the cables for damage, and replace if necessary.
Does the problem remain?
Step 4
Check the paper width and paper length sensors for damage, and replace
if necessary.
Does the problem remain?
356.
Diagnostic information
136
Yes No
Go to step 3. The problem is solved.
Go to step 4. The problem is solved.
Contact the next level The problem is solved.
of support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.
Go to step 4. The problem is solved.
Go to step 5. The problem is solved.
7421