Additional printer setup
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
Available internal options
•
Memory card
–
DDR3 DIMM
–
Flash memory
•
Fonts
•
Firmware
Forms Barcode
Prescribe
IPDS
Printcryption
•
Printer hard disk
•
TM
Lexmark
Internal Solutions Ports (ISP)
–
Parallel 1284‑B interface
–
MarkNet N8130 10/100 fiber interface
–
MarkNet N8350 802.11 b/g/n Wireless Print Server
–
RS‑232‑C serial interface
28