Developer Unit Removal - Lexmark MX910de Service Manual

6
Remove the four screws (B).
7
Disconnect the cables, and then remove the assembly.

Developer unit removal

1
Remove the standard bin base. See
2
Remove the top front door. See
3
Remove the bottom front door. See
4
Remove the waste toner door mount. See
5
Remove the toner agitator. See
B
"Standard bin base removal" on page
"Top front door removal" on page
"Bottom front door removal" on page
"Waste toner door mount removal" on page
"Toner agitator removal" on page
Repair information
336
389.
327.
327.
328.
335.
7421