Adf Cis Power Supply Board Removal; Adf Controller Board Removal; Adf Cushion Removal; Adf Duplex Scan Glass Removal - Lexmark MX910de Service Manual

ADF CIS power supply board removal

1
Remove the ADF rear cover. See
2
Remove the ADF registration guide. See
3
Disconnect the two cables (A), and then remove the two screws (B).
4
Remove the ADF CIS power supply board.

ADF controller board removal

1
Remove the ADF rear cover. See
2
Disconnect all the cables on the ADF controller board.
3
Remove the four screws securing the ADF controller board, and then remove the board.

ADF cushion removal

1
Open the ADF.
2
Remove the ADF cushion.

ADF duplex scan glass removal

1
Remove the scanner left cover. See
2
Remove the control panel bottom cover. See
3
Remove the scanner rear cover. See
4
Remove the scanner top cover. See
"ADF rear cover removal" on page
"ADF registration guide removal" on page
"ADF rear cover removal" on page
"Scanner left cover removal" on page
"Control panel bottom cover removal" on page
"Scanner rear cover removal" on page
"Scanner top cover removal" on page
Repair information
396
410.
410.
410.
429.
430.
430.
7421
442.