Remove Paper From [Linked Set Bin Name]; Remove Paper From Standard Output Bin; Replace All Originals If Restarting Job; Replace Cartridge, 0 Estimated Pages Remain [88.Xy] - Lexmark MX910de Service Manual

Remove paper from [linked set bin name]

Remove paper from the specified bin. The printer automatically detects paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace all originals if restarting job.

Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan job.
• Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last successful scan job.
• Touch Restart job to restart the scan job with the same settings from the previous scan job.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace cartridge, printer region mismatch [42.xy]

Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
Printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
Diagnostic information
129
7421