Table of Contents
Advertisement
9-12
4. Settings for Input Accounts
Input Accounts
When the administrator registers each account (a department or an individual user) with the system by
making various settings uniquely for that account, it allows the account to use the machine according to
the settings made and to set up a mailbox. A unique access code can be programmed for each account to
prevent unauthorized use of this machine by any third party. Up to 100 accounts can be registered, and the
settings made for each account by the administrator can be changed after registration. ☞p.8-38
* This function becomes available only when "100 Accounts" is selected in Admin. Management Mode.
☞p.9-6
Account 1
Account Name
Set the name of the account. Up to 12 characters
can be used.
Access Code
Program an access code to restrict the users.
No.
Program an administration number for each
account.
Account 2
Account TSI
The TSI information to be printed on any
transmitted document can be programmed for each
account. Up to 20 characters can be used.
F CODE
F CODE
The F CODE is programmed to select the mailbox
that can be used for an account. Up to 20 numeric
digits can be programmed using numerals from 0
through 9 and the symbols of
F CODE Password
The password for the mailbox is programmed. Up
to 20 numeric digits can be programmed using
numerals from 0 through 9 and the symbols
of
and #.
Remote Input Check
Select whether to use a password ("ON") or not
("OFF") to restrict reception of documents into
mailboxes from other fax machines.
The factory setting is "OFF."
and #.
Advertisement
Table of Contents
