Adjusting Facsimile Reduction - Minolta Di200f Operator's Manual

5-12
2. Sending Documents

Adjusting Facsimile Reduction

Reduction can be adjusted according to the paper size on the receiving side.
A document is normally sent in its original size, but it is automatically reduced as may be necessary to the
paper size of the recipient's fax machine (Auto Size).
If automatic size reduction is not required or the document must be sent in its original size, select the non-
reduction function (No Reduction). Then, only the area of the scanned document that matches the paper
size of the recipient's fax machine will be sent.
Ledger L (11×17 L)
Transmitter
Ledger L (11×17 L)
NOTES
• After transmission, the document may be reduced in size when printed depending on the model of the
fax machine at the destination.
×
• When an
Ledger L (11
size at the destination. To send an
Reduction.
Recipient's Paper Size
Ledger L (11×17 L)
Legal L
Letter L
Transmitter
Auto Size
No Reduction
or Legal L document is sent, it is automatically reduced to match the paper
17 L)
×
Ledger L (11
Document Size
Ledger L (11×17 L)
Original Size
Reduced to Legal L
Reduced to Letter L
Recipient
Letter L
Recipient
Letter L
or Legal L document in its original size, select No
17 L)
Legal L
Original Size
Original Size
Reduced to Letter L
1166O203AA
1166O204AE