Registering Relay Groups - Minolta Di200f Operator's Manual

Table of Contents

Advertisement

Registering Relay Groups

Programming the receiving station (final destination) as a relay group is convenient when this machine is
used as a relay station in relay transmissions. Up to five relay groups can be registered. The group number
can range from [1] through [5]. A maximum of 200 receiving stations can be attached to one group.
* Abbreviated numbers are used to register destinations in a relay group. The destination to be registered
as a relay group must be preprogrammed as abbreviated dialing or in a one-touch key.
Registering
1
For how to show the [Relay Group] key, see
"Selecting FAX Input." ☞p.8-9
2
Touch [Relay Group].
3
Touch the group number key in which the
destination is to be registered.
.
4
Touch [Abbr. #], enter the abbreviated
number of the destination, then touch
[Enter].
4016P415CB
Useful Tips
• Use the 10-Key Pad to enter the abbreviated
number programmed as abbreviated dialing.
[ ↓ ] or [ ↑ ] can also be used to select the
abbreviated number.
• To select multiple destinations, select one
destination and then touch [Abbr. #] to select
the next one.
• To confirm the selected final destination, touch
[Detail] and go over what was selected. Touch
[Del.] to delete the displayed destination.
5
Touch [Enter].
4016P416CA
8-33
2. Settings for FAX Input
4016P417CA

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di251fDi351f

Table of Contents