Minolta Di200f Operator's Manual page 156

Using the Document Feeder
1
Load the document in the document feeder.
2
Touch [10-Key Dialing].
3
Using the 10-Key Pad, enter the fax number
of the destination.
Useful Tip
If a wrong number has been entered, press the
Clear key and then enter the correct one.
4
Press the Start key.
NOTES
• To quit transmission, press the Stop key.
• If memory is full, wait some while before
retrying transmission.
Useful Tip
If the transmission has been unsuccessful, the
particular document is left in memory so it can
later be retransmitted. The document data can
still be erased to allow for more space in
memory. ☞p.5-26
Using Direct Dialing to Communicate
with Overseas Destinations
If the country code and destination number are
entered after the international code, you may hear
a busy tone during dialing and transmission may
not be possible.
In such cases, press the Pause key twice after
entering the international code to insert an
approx.-6-second pause, and then enter the rest of
the number. If this still fails to connect the call,
perform manual transmission. ☞p.6-4
4017P253EA
1166O030AA
5-5
2. Sending Documents