What Does Each Message Mean - Minolta Di200f Operator's Manual

10-42

10. What Does Each Message Mean?

What does each message mean?
Message
A malfunction was detected.
Please call your technical
representative and provide code:
Please add toner.
The Imaging Unit needs to be
changed.
Call your technical
representative.
Stapler empty. Replace Staple
Cartridge or cancel Staple mode.
Return the following number of
originals to Document Feeder.
Image data has caused memory
overflow. Your copy job has been
canceled.
This mode cannot be selected
with the
Cause
The machine has malfunctioned
and is unable to make prints.
Toner has run out and the
machine is unable to make
copies.
The PC Drum has reached its
service life and the machine is
unable to make further copies.
The staples have run out.
The machine needs service.
4016P225CA
After a misfed sheet of paper has
been cleared, you need to reload
the originals fed out onto the
Document Exit Tray onto the
Document Feed Tray.
The machine is unable to scan the
data for lack of memory.
You have set two functions that
conflict with each other.
Action
Call and inform your Technical
Representative of the code being
shown on the Touch Panel.
Replace the Toner Bottle with a
new one.
("When the Message 'Please add
toner.' Appears" ☞p.10-10)
Call your Technical
Representative.
Replace the Staple Cartridge with
a new one. ("When the Message
'Stapler empty.' Appears"
☞p.10-12)
Call your Technical
Representative.
Add the number of originals
indicated to the bottom of the
remaining stack and reload.
Wait until a print cycle is run or
erase a reserved job to make room
for new data.
Cancel either one of the two
functions.