Manual Bypass Copying - Minolta Di200f Operator's Manual

Manual Bypass Copying

• Use Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto OHP
transparencies, Card, or any other special paper.
• The setting of the paper size is needed for manual bypass copying.
Paper that Can be Used for Manual Bypass
◆ Types of Paper
Plain paper (weighing 16 lb to 24 lb), recycled paper
Card (weighing 24-1/4 lb to 41-3/4 lb), labels
OHP transparencies
◆ Paper Size
Max. Size: 11-11/16×17
Minimum Size: 3-9/16×5-1/2
Using the Manual Bypass Tray
1
Place the original on the Original Glass and
make the control panel settings.
2
Swing down the Manual Bypass Tray.
3
Slide the Paper Guides to the size of the
paper and insert a sheet of paper.
NOTES
4015O050AB
• Correct any curl if you are using Card.
• When making copies on Card, OHP
transparencies, or labels, the following
functions cannot be used: 2-sided copying,
Booklet Creation, Staple, and Hole Punch.
• The copy will be made on the side facing down.
Useful Tip
Continuous multiple copies can be made if Card,
OHP transparencies, or labels are loaded in the
1st Drawer. ☞p.10-2
3-7
2. Selecting the Paper
4015O051AB