Minolta Di200f Operator's Manual page 260

6
Touch [One-Touch] or [Abbr. #].
Useful Tips
• If Serial Broadcast Transmission is to be
programmed, select all destinations to be
transmitted.
• If the destination is not to be programmed,
touch [No Dest.].
7
Select the destination and touch [Enter].
"Using One-Touch Dialing for
Transmission" ☞p.5-6
"Using Abbreviated Dialing for
Transmission" ☞p.5-7
8
Touch [Next].
9
Touch [Transmission Setting].
10
Touch [Quality/Reduction] and/or [Menu],
and select the functions to be programmed.
4016P395CA
NOTES
• Timer Transmission and Real Time
Transmission cannot be selected
simultaneously.
• It two or more destinations are selected for
Real Time Transmission, the Real Time
Transmission setting will be reset.
• It two or more destinations are selected for
Priority Transmission, the Priority
Transmission setting will be reset.
• When 2in1 Transmission is selected, Auto Size
is selected as the zoom ratio.
Useful Tip
When [Quality/Reduction] is selected, you can
then set [Quality], [Reduction], [Contrast], and
[Scan Area].
11
Touch [Enter].
12
Check the details of the settings made and
make sure that you have made the correct
settings.
4016P396CA
13
Touch [Enter].
8-25
2. Settings for FAX Input
4016P397CA
4016P398CA