Minolta Di200f Operator's Manual page 304

Long Doc
Long Document
Setting can be made whether to reduce
("Reduction") or cut off ("Cut Off") a document
received that is longer than the size of the print
paper.
Select "Reduction" if the image is to be reduced or
"Cut Off" if the excess part of the image may be
cut off.
The factory setting is "Reduction."
Reduction
The reduction ratio can be selected in the range
from 60% to 100% only if "Reduction" has been
selected for how to handle long documents.
The factory setting is "60%."
Cut Off Length
The cut-off length can be selected in the range
from 0 mm to 24 mm only if "Cut Off" has been
selected for how to handle long documents.
The factory setting is "20 mm."
Paper 1
If no paper matching up to TX Doc.
Size?
Use "Paper Priority" or "Cassette Priority" as the
basis for selecting another paper when the
currently selected paper runs out.
The factory setting is "Paper Priority."
Print Paper Select
Choose how to select the paper size when a fax is
received, either "Standard," "Width Priority," or
"Constant Width Mode."
The factory setting is "Standard."
6. Settings for FAX Recept Settings
Unselectable Cassette
Designate a paper source to be excluded from the
possible choices, such as a source containing OHP
transparencies or recycled paper, when the
machine is set to select an appropriate paper
source automatically.
The paper source will not be used for fax reception
if it has been designated for special paper, even
when it is not selected for "Unselectable Cassette."
"Special Paper Setting" ☞p.3-6
Paper 2
2in1 Receive
Selection can be made whether to use 2in1
Reception ("ON") or not ("OFF").
The factory setting is "ON."
Rotation Print
Select whether to use Rotation Print or not, and if
used, whether the document is to be sorted or not.
The factory setting is "Sort OFF" (Rotation
ON).
9-25