Initial Settings Procedures - Minolta Di200f Operator's Manual

9-20
5. Settings for Initial Settings

Initial Settings Procedures

Settings for Functions Other Than
"Received Document"
1
For how to show the [Initial Settings] key,
see "Setting Admin. Management." ☞p.9-2
2
Touch [Initial Settings].
3
Touch [ID] ([Line], [Func.], or [Manage]).
4
Select the function to be set.
<For "TSI" and "Self-ID">
Enter the TSI or self-ID. See "Entering
Characters." ☞p.7-10
<For "Self-Telephone #">
Using the 10-Key Pad, enter the self-
telephone number.
Useful Tips
4016P449CA
• The same procedure applies to "Com.
Password" and "Incomplete TX Hold."
• To set the time for "Incomplete TX Hold,"
select from among 10M., 20M., 30M., 40M.,
50M., 1HR, 2HR, 4HR, 8HR, 12HR, 24HR, and
72HR. [ ▼ ] or [ ▲ ] may be used to select a
longer or shorter retention time. When [Not
Held] is touched, the document which has not
been successfully transmitted is erased
immediately.
• To re-enter a numeral, use [ ← ] or [ → ] to move
the cursor and re-enter the new numeral, or
press the Clear key and re-enter it. When
4017P450EA
[Delete] is touched, the character on the cursor
is deleted.
• To program an international code, touch [+]
and enter the applicable country code.
<For "Line Type">
Select the line type.
4016P451CA
4017P452EA
4016P453CA