Settings For Fax Trans. Settings; Fax Trans. Settings - Minolta Di200f Operator's Manual

9-28

7. Settings for FAX Trans. Settings

FAX Trans. Settings

This function allows the administrator to set the various fax transmission functions.
TX Set 1
Priority Quality
Select the default setting for Image Quality that is
returned to after each operation is completed, from
among "Standard," "Fine," "Super Fine," "Text +
Photo," "GSR," and "Super GSR."
The factory setting is "Standard."
Priority Contrast
Select the default setting for Contrast that is
returned to after each operation is completed, from
among "Lighter," "Normal," and "Darker."
The factory setting is "Normal."
Com. Mode
<Only when G3 MULTIPORT SERIES 2 is
mounted>
Select the default setting for the communication
mode, either "G3-1" or "G3-2."
The factory setting is "G3-1."
TX Set 2
TX
<Only when the Automatic Document Feeder is
mounted>
Choose the default setting of the transmission
method between "Memory TX" and "Real-Time."
The factory setting is "Memory TX."
TSI
Select whether or not to put TSI on the transmitted
document, or where to put it, either inside or
outside the image area. Options are "On The
Doc.," "Out of Doc.," and "OFF."
The TSI is required on all facsimile transmissions.
It is unlawful to turn this feature off. ☞p.viii
The factory setting is "On The Doc."
Password TX
Select whether to use password transmission
("ON") or not ("OFF").
The factory setting is "OFF."
TX Marker
<Only when TX Marker STAMP UNIT is
mounted on the Automatic Document Feeder>
Select whether or not to put TX Marker on the
transmitted document, or where to put it, either at
the bottom edge only or at the top and bottom
edges. Options are "Bottom," "Top & Bottom,"
and "OFF" (not printed).
The factory setting is "OFF."