Tx Marker - Minolta Di200f Operator's Manual

6-12
1.Various Ways of Transmitting Documents

TX Marker

<Only when TX Marker STAMP UNIT is mounted on Automatic Document Feeder>
Select the TX Marker function to make sure that each page of your document has been scanned properly.
Any page that is not marked should be retransmitted.
NOTES
• Change the Spare TX Marker STAMP when the stamp gets faint. ☞p.10-40
• TX Marker cannot be used with any copying functions.
• Utility Mode allows you to make the default setting for TX Marker. ☞p.8-39, 9-28
1
Load the document.
2
Touch [FAX Menu] and then [Set 1].
Markers on Both Top
and Bottom Edges
4016P283CA
Marker on Bottom Edge
3
Touch [TX Marker].
Useful Tips
• With Real Time Transmission and Manual
Transmission, markers are stamped only on
pages that have been successfully transmitted
to the destination.
• In Quick Memory Transmission, markers are
stamped only on pages that have been
successfully stored in memory.
1166O198AC
4016P292CA