User Manual [ Basic Operations ] Di2010/Di2510/Di3010/Di3510 Introduction Available Features Before Making Copies Basic Copy Operations Copy Paper Original Documents Specifying Copy Settings Touch Panel Messages Troubleshooting...
Names of Control Panel Parts and Their Functions ...3-2 Checking the Settings ...3-4 To check the settings ...3-4 To change the settings...3-4 User Accessibility Operations ...3-5 To change the screen display setting (“Screen Mode” function)...3-5 To change the key settings (“Key Speed Settings” function) ...3-6 Di2010/Di2510/Di3010/Di3510...
Page 3
Stopping Copying... 4-4 To stop/restart/delete a copy job ... 4-4 Interrupting a Copy Job ... 4-5 To interrupt copying... 4-5 Making Copies Using Accounts... 4-6 Using the “Copy Track Mode” Parameter... 4-6 To make copies when accounts are specified... 4-6 Contents Di2010/Di2510/Di3010/Di3510...
Page 4
Documents of Mixed Original Detection mode...6-2 Mixed Width Document Sizes ...6-3 Precautions Concerning the Documents...6-3 Feeding the Document Through the Duplexing Document Feeder ...6-4 Loading the Document ...6-4 To load a document of mixed sizes (“Mixed Orig Detection” function) ...6-5 Di2010/Di2510/Di3010/Di3510...
Page 5
To specify Orig. Ö Copy settings... 7-21 Copying a Bound Document... 7-24 Copying a Book ... 7-27 Copying Book Pages onto Separate Double-Sided Pages ... 7-30 Quickly Selecting Default Settings... 7-32 Specifying a Copy Density ... 7-33 Selecting a Density Setting... 7-33 Contents Di2010/Di2510/Di3010/Di3510...
Page 6
To clear jammed staples ...8-30 When the Message “Hole Punch collection box is full.” Appears...8-35 To empty the punch box...8-35 Troubleshooting Main Messages and Their Remedies...9-2 When Incorrect Copies Are Printed...9-3 When the Copier Is Not Operating Correctly...9-6 10 Index 10.1 Index...10-2 Di2010/Di2510/Di3010/Di3510...
Advanced Operations Read the User Manual: Advanced Operations for the following items. Introduction Safety Information Precautions Auxiliary Functions Utility Mode Operations Administrator Management Operations Appendix Index Contents Di2010/Di2510/Di3010/Di3510...
This volume contains precautions for using the machine and descriptions of the procedures for basic operations, replacing parts and supplies, and trouble- shooting. The Basic Operations volume is a quick reference for immediate use of the copier. 1.1 Introduction Di2010/Di2510/Di3010/Di3510...
Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di2010/Di2510/Di3010/Di3510 An illustration inserted here shows what operations must be performed.
(X), the paper has a vertical or portrait orientation, indicat- ed by either “L” or Crosswise If the width (Y) of the paper is longer than the length (X), the paper has a horizontal or landscape orientation, in- dicated by either “C” or Di2010/Di2510/Di3010/Di3510...
With the “landscape” orientation, the paper is horizontal, like a land- scape. Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains. The paper is empty. Di2010/Di2510/Di3010/Di3510...
2 Way Paper Feed Cabinet PF-210 (optional) Job Separator JS-203 (optional) Duplex Unit AD-16 (Option for the Di2010 only) Switchback Unit SB-1 (Option for the Di2010 only) 1.4 Components and Their Functions Description Automatically feeds one document sheet at a time for scanning, and automatically turns over double-sided documents for scanning.
Page 14
(optional)* 32 MB/64 MB/128 MB Memory M32-4/M64-2/M128-3 (optional)* Di2010/Di2510/Di3010/Di3510 Description Equipped with a paper drawer that can supply 500 sheets of paper, for upper paper feed unit only. Referred to as the “paper feed cabinet” throughout the manual. Finishes printed pages according to the selected finishing mode (sorting or stapling), then feeds out the pages.
Page 15
Required when using this copier as a printer, scanner, or as an Internet fax machine. For more details, refer to the Scanner Mode User Manual or the Printer Controller Manual. Allows printed pages to be separated. Pull the lever when taking out the paper. Di2010/Di2510/Di3010/Di3510...
Paper supply indicator Front door Paper output tray Paper stopper Touch panel Di2010/Di2510/Di3010/Di3510 Description Opened when clearing paper misfeeds. Used to open the right-side door. Used for manual feeding paper for making copies and printouts. Can be loaded with 150 sheets of paper.
Page 17
Part Name Document pad Original glass Switchback unit * (Option for the Di2010 only) Duplex unit (Option for the Di2010 only) Duplex unit door 1st paper drawer 2nd paper drawer Control panel Document scales * The internal options are not shown.
Page 18
Part Name Duplexing Document Feeder connector Power switch Power cord socket Di2010/Di2510/Di3010/Di3510 Description Used for connecting the duplexing document feeder hookup cord. Used to turn the copier on and off. → page 3-10 Used for connecting the printer’s power cord.
Lights up or flashes to indicate the status of the copier. Prevents the documents from falling out of the document output tray. Description Used to open the lower-right door. Each drawer can hold up to 500 sheets of paper The paper size can be adjusted freely. Di2010/Di2510/Di3010/Di3510...
Page 20
Precautions for using the finisher, saddle kit and mail bin kit Do not place objects on top of the saddle kit or mail bin kit. Do not place objects under the paper output trays of the finisher. Di2010/Di2510/Di3010/Di3510 Description Collects printed pages that are sorted.
Page 21
1.5 Part Names and Their Functions Description Holds up to 2,500 sheets of paper. Opened when clearing paper misfeeds. Pressed when loading paper. Description Collects printed pages. Description Collects printed pages. Opened when clearing paper misfeeds that occurred in the finisher. Di2010/Di2510/Di3010/Di3510...
Original Document Note In order to perform the following procedure, the optional duplex unit and switch- back unit must be installed (for Di2010). Position the document on the original glass with the center aligned with the book mark on the document scale.
Page 24
2.1 Useful Operations For book-binding, touch [Standard Book] or [RightBound], and then touch [Separation]. Next, touch [Enter]. Touch [Double-Sided], and then touch [Page Order]. Touch [Book Order], and then touch [Enter]. Press the [Start] key. Di2010/Di2510/Di3010/Di3510...
Page 25
[Start] key. Repeat step 7, and when the last page has been scanned, touch [Finish]. Next, press the [Start] key. 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
Original Document Note In order to perform the following procedure, the optional duplexing document feeder, duplex unit and switchback unit (for Di2010) must be installed. Load the document into the duplexing document feeder. ❍ The document can also be positioned on the original glass.
Page 27
After all copies are printed, fold the pages in half to form a booklet. If the optional saddle kit is installed, creasing or folding can be set. For de- tails, refer to “Creasing and Folding” on page 7-10. 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
In order to perform the following procedure, the optional duplexing document feeder, finisher must be installed. Load the document into the duplexing document feeder. ❍ The document can also be positioned on the original glass. Touch [Finishing]. Di2010/Di2510/Di3010/Di3510 Staple Copy...
If the document is placed directly on the original glass and the size is detected automatically, the document will be scanned with a standard size. If the document has a non-standard size, first measure the size of the docu- ment. Position the document to be copied. Di2010/Di2510/Di3010/Di3510 Copy...
Page 31
[Mode Change]. Touch [Card], and then touch [Enter]. ❍ If paper with a non-standard size is loaded, touch [Custom Size], and then specify the paper size. (For details, refer to page 5-16.) 2-10 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
Page 33
❍ For this example, set the length of side Y to “2 3/4”. Press the [Start] key. Sixteen 4 in. × 1-3/8 in. tickets are copied onto one sheet of paper. 2-12 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
The width of the erased area refers to how much of the document will be erased. If enlarged or reduced copies are made, the same width is erased and an en- larged or reduced copy is printed. Position the document to be copied. Touch [Auxiliary], and then touch [Edge/Frame Erase]. Di2010/Di2510/Di3010/Di3510 Copy 2-13...
Page 35
Select the desired position of the erased area. (Example: Erasing a frame) Touch width of the erased area. Touch [Enter]. Press the [Start] key. 2-14 to specify the Di2010/Di2510/Di3010/Di3510 2.1 Useful Operations...
Note In order to perform the following procedure, the optional duplexing document feeder, duplex unit and switchback unit (for Di2010) must be installed. Double-sided 2in1 copying and single-sided 4in1 copying reduce the paper us- age by one fourth, and double-sided 4in1 copying reduces paper usage by one eighth.
Page 37
Touch [Orig. Ö Copy], and then touch [4in1/Booklet]. Touch [Double-2in1]. Press the [Start] key. 2-16 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
Press the [Utility] key. Touch [User’s Choice]. Touch [3/6]. ❍ To specify settings for the Energy Save mode, continue with step 4. ❍ To specify settings for the Sleep mode, skip to step 7. Touch [Energy Save Mode]. Di2010/Di2510/Di3010/Di3510 2-17...
Page 39
Key Pad to specify the desired length of time until the copier enters Energy Save mode. Touch [Enter]. Touch [Sleep Mode Setting]. Use the 10-Key Pad to specify the desired length of time until the copier enters Sleep mode. 2-18 2.1 Useful Operations Di2010/Di2510/Di3010/Di3510...
Press to start a scanning or copy operation. Use to enter a number, such as the number of copies. Used to display the Utility screen. For more details, refer to “Utility Mode Operations” in the Advanced Operations volume of the User Manual. Di2010/Di2510/Di3010/Di3510...
Page 44
[Mode Check] key [Accessibility] key [Enlarge Display] key [Contrast] dial Di2010/Di2510/Di3010/Di3510 Function • Press to display a list of all specified settings. From this list, the screen to specify each setting can be displayed and the setting can be changed.
Touch the button for the setting that you wish to change. The screen for specifying the setting appears. Change the setting according to the corresponding procedure. 3.2 Checking the Settings Di2010/Di2510/Di3010/Di3510...
Select whether the screens appear in the touch panel in black on white or in white on black. Press the [Accessibility] key in the control panel. Touch [Screen Mode]. Touch [Inverted Screen] to display the screens in white on black. To return the screens to the normal display, touch [Normal Screen]. Touch [Enter]. Di2010/Di2510/Di3010/Di3510...
Example) When the [1] key is held down: Touch [CHECK] to check the specified settings. Touch [Enter]. 3.3 User Accessibility Operations Inverted Screen Interval Time Delay Time Di2010/Di2510/Di3010/Di3510...
❍ Touch [30 sec.], [60 sec.], [90 sec.] or [120 sec.]. ❍ To immediately display the Basics screen without displaying a screen requesting confirmation to reset the copier, touch [None]. Touch [Enter]. Di2010/Di2510/Di3010/Di3510...
Basic volume setting can be set in User Management. For details, refer to Utilities in the Advanced Operations volume. Press the [Accessibility] key in the control panel. Touch [Sound Setting]. Select the desired volume setting. Touch [Enter]. 3.3 User Accessibility Operations Di2010/Di2510/Di3010/Di3510...
Touch in this area to scroll toward the lower- Touch this arrow to scroll down through the left corner of the screen. screen. Di2010/Di2510/Di3010/Di3510 Touch in this area to scroll toward the upper- right corner of the screen. Touch this arrow to scroll right through the screen.
Turning the Copier On and Off To turn on the copier Set the power switch to “I”. Make sure that the sub power switch has been pressed in. 3-10 3.5 Turning the Copier On and Off Di2010/Di2510/Di3010/Di3510...
Settings that have not been programmed will be cleared. Jobs that are queued to be printed are deleted. Data scanned using the “Scan to Memory” function is deleted. Scanned data that could be printed using the “Memory Recall” function is deleted. Di2010/Di2510/Di3010/Di3510 3-11...
The settings specifying whether or not and the time until the copier enters En- ergy Save mode can be changed. For details, refer to “Changing Default Set- tings” of “Utility Mode Operations” in the Advanced Operations volume of the User Manual. 3-12 3.5 Turning the Copier On and Off Di2010/Di2510/Di3010/Di3510...
Adjust the control panel to the angle that allows for easy operation. ➜ Pull the control panel release lever, and then adjust the angle of the control panel. Di2010/Di2510/Di3010/Di3510 ➀ Upper position (base position) ➁ Middle position ➂ Lower position...
To change the default settings, refer to “Changing Default Settings” in the Ad- vanced Operations volume of the User Manual. Number of copies: 1 Finishing: Non-Sort Zoom: 1.000 (Full Size) Paper: AutoPaper Density: Auto Exposure (Text/Photo mode) Orig. Ö Copy: Single-Sided Ö Single-Sided 3-14 3.7 Using the Touch Panel Di2010/Di2510/Di3010/Di3510...
User Manual. The default settings can be changed using the various functions on the User’s Choice screen. For details, refer to “Changing Default Settings” of “Utility Mode Operations” in the Advanced Operations volume of the User Manual. Di2010/Di2510/Di3010/Di3510 3-15...
The current settings are shown with graphics. • The status of the job is shown with graphics. • The remaining amount of memory and graphics warning about empty toner or an empty paper drawer are displayed here. Di2010/Di2510/Di3010/Di3510...
Displays a list of operations that are being performed Print Order: Displays the order of documents that are being copied or printed or waiting to be copied or printed Print: Displays the print status of documents being copied or printed Com.: Not used Doc.: Not used Di2010/Di2510/Di3010/Di3510 3-17...
Touch [↓] and [↑] to view the status of a job that is not displayed. Check the details, and then touch [Enter]. ❍ To delete the currently selected job, select that job and touch [Delete]. 3-18 3.7 Using the Touch Panel Di2010/Di2510/Di3010/Di3510...
Touch [Job List]. Touch [Print Order]. Check the printing order. ❍ Touch [↓] and [↑] to view other parts of the list. Up to 8 items in the printing order can be displayed. After checking the necessary information, touch [Enter]. Di2010/Di2510/Di3010/Di3510 3-19...
❍ Touch [↓] and [↑] to view other parts of the list. After checking the necessary information, touch [Enter]. Note To delete the job, select that job and touch [Delete]. 3-20 3.7 Using the Touch Panel Di2010/Di2510/Di3010/Di3510...
- The [Panel Reset] key was pressed while printing was stopped. To use the memory recall feature After copying is finished, touch [Job List]. Touch [Memory Recall Waiting]. The information for the job still saved in the memory is displayed. Di2010/Di2510/Di3010/Di3510 3-21...
Page 63
At this time, the Finishing set- ting and the number of copies can be changed. Press the [Start] key. The copies are printed. After copying confidential documents, press the [Delete] key to erase the data from the memory. 3-22 3.7 Using the Touch Panel Di2010/Di2510/Di3010/Di3510...
To copy a book or copy while using less paper, touch [Orig. Ö Copy]. ❍ For details, refer to “Selecting the Orig. Ö Copy Settings” (page 7-18). ❍ To change the density of the copy, touch [Density]. For details, refer to “Selecting a Copy Density” (page 7-33). 4.1 Making Basic Copies Di2010/Di2510/Di3010/Di3510...
❍ On the Di3510, up to 999 copies can be printed. On the Di3010, Di2510 or Di2010 up to 99 copies can be printed. ❍ To change the setting, press the [C] key, and then enter the correct setting.
To restart a job that has been stopped, press the [Start] key. Copying continues. To delete the stopped copy job, select the button for the job that you wish to delete. The job is deleted. 4.2 Stopping Copying Di2010/Di2510/Di3010/Di3510...
When the interrupt mode copy has completed, press the [Interrupt] key. The indicator on the [Interrupt] key goes off and the Interrupt mode is cancelled. The copy settings for the job before copying was interrupted appear, and copying of the job that was interrupted automatically continues. Di2010/Di2510/Di3010/Di3510...
❍ If [100 Account 2] has been specified, pressing the [Access] key will display the screen shown at right. Enter the 6-digit access code using the 10-Key Pad. 4.4 Making Copies Using Accounts Di2010/Di2510/Di3010/Di3510...
Page 70
Input Screen, and press the [Access] key. The Basics screen is displayed. Copying will take place using the desired copy mode. When copying has finished, press the [Access] key again. The Settings Screen is displayed on the Account Number Input Screen. Di2010/Di2510/Di3010/Di3510...
Page 71
4.4 Making Copies Using Accounts Di2010/Di2510/Di3010/Di3510...
— 3rd paper drawer — 4th paper drawer — Double-sided copies — * LCC: Large capacity cabinet 2: Available —: Not available Di2010/Di2510/Di3010/Di3510 Paper Length 5-1/2 in. to 17 in. — — — — — × Legal L Letter C Letter L —...
Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di2010/Di2510/Di3010/Di3510...
Not exposed to a flame ❍ Not exposed to high humidity ❍ Not extremely dusty Unwrapped paper should be placed in a plastic bag and stored in a cool, dark location. Keep paper out of the reach of children. Di2010/Di2510/Di3010/Di3510...
We recommend that you make selections for special media in the User’s Choice Special Settings. For details, refer to User’s Choice Settings in the Advanced Operations volume of the User Manual. 5.5 Automatically Selecting the Paper Source Di2010/Di2510/Di3010/Di3510...
When loading additional paper, re- move any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. Di2010/Di2510/Di3010/Di3510...
Load the paper into the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Note Be careful not to touch the my- lar. 5-10 5.6 Loading Paper Mylar Di2010/Di2510/Di3010/Di3510...
Load the paper into the right side of the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Note Be careful not to touch the my- lar. Di2010/Di2510/Di3010/Di3510 Mylar 5-11...
Copying onto the lower side of the set paper. Note To set paper other than plain paper, settings must be made in the panel. To load plain paper Open the multiple bypass tray. When loading large-sized paper, open the tray extension. 5-12 5.6 Loading Paper Tray extension Di2010/Di2510/Di3010/Di3510...
Note Do not load more than 50 post- cards. Do not load postcards crosswise. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Di2010/Di2510/Di3010/Di3510 Paper guides 5-13...
After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Note Do not load envelopes crosswise. Do not place the flap of envelopes facing down. 5-14 5.6 Loading Paper Di2010/Di2510/Di3010/Di3510...
Place documents with the side to be printed facing down. Note Do not load more than 50 label sheets. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Di2010/Di2510/Di3010/Di3510 5-15...
Touch and press the [C] key. Then, touch select the length of side X for the paper that is loaded. ❍ Touch so that the cursor moves below the digit that you wish to change. 5-16 Di2010/Di2510/Di3010/Di3510 5.6 Loading Paper...
Page 88
5.6 Loading Paper Touch and press the [C] key. Then, touch select the length of side Y for the paper that is loaded. ❍ Touch until the cursor moves below the digit that you wish to change. Touch [Enter]. Di2010/Di2510/Di3010/Di3510 5-17...
Touch the button for the multiple bypass tray, and then touch [Mode Change]. Touch [Custom Size]. The Custom Size screen appears. Touch [Memorize Paper Size]. 5-18 5.6 Loading Paper Di2010/Di2510/Di3010/Di3510...
Page 90
❍ To store another custom paper size, repeat steps 4, 5 and 6. Touch [Enter]. This completes the storing of custom paper sizes. Di2010/Di2510/Di3010/Di3510 5-19...
Touch [Paper]. Touch the button for the multiple bypass tray, and then touch [Mode Change]. Touch [Custom Size]. Touch either [1] or [2] to select the stored custom paper size, and then touch [Enter]. 5-20 5.6 Loading Paper Di2010/Di2510/Di3010/Di3510...
Page 92
5.6 Loading Paper Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 5-21...
[Mode Change]. Touch the button for the type of paper loaded into the multiple bypass tray, and then touch [Enter]. Press the [Start] key. The copies are printed. 5-22 5.7 Selecting the Paper Setting Di2010/Di2510/Di3010/Di3510...
Double-Sided Documents Plain Paper (13-1/4 lbs. to 34 lbs.) × 17 L, Legal L, Letter L, Letter C, Invoice L (5-1/ × 8-1/2 in. L), Invoice C (5-1/2 in. Double-Sided Documents Di2010/Di2510/Di3010/Di3510 Documents of mixed sizes × 8-1/2 in. C)
Curled documents Wrinkled or torn documents Overhead transparencies If non-standard-sized paper is determined to be close to a standard size, copying with the “Auto Paper” or “Auto Size” settings is possible. Di2010/Di2510/Di3010/Di3510 11 in. 8-1/2 in. Letter C Legal L Letter L —...
Ä than the mark. Adjust the document guides to the size of the document. Note Be sure to load the document correctly, otherwise the pages may not be fed in straight. Di2010/Di2510/Di3010/Di3510...
Stack the pages of the document face up as shown, making sure that all pages are aligned at the top edge and on the left side. Di2010/Di2510/Di3010/Di3510...
Page 99
Note Certain document size combinations are not possible with the “Mixed Orig Detection” function. For details, refer to page 6-3. In the Basics screen, touch [Mixed Orig Detection]. Select the desired copy settings, and then press the [Start] key. Di2010/Di2510/Di3010/Di3510...
Follow the procedure described below when copying plain paper or documents that cannot be fed through the duplexing document feeder. Lift open the original cover, or the duplexing document feeder if it is installed, and then position the document face down on the original glass. Di2010/Di2510/Di3010/Di3510 When loaded vertically...
Place a blank sheet of paper of the same size over the document. Carefully close the original cover, or the duplexing document feeder if it is installed. 6.3 Positioning Documents on the Original Glass Di2010/Di2510/Di3010/Di3510...
Do not place objects exceeding 6-1/2 lbs. on the original glass. If a book is placed on the original glass, do not press it down with extreme force, otherwise the original glass may be damaged. For details, refer to “Copying a Book” on page 7-27. Di2010/Di2510/Di3010/Di3510...
Orig. Ö Copy screen. → page 7-21 When making 11 × 17 L or Legal L copies, the “2-Point Staple” and “Hole Punch” settings are not available with the following positions. Di2010/Di2510/Di3010/Di3510 Original Di- 9 10...
Page 123
6.5 Large Documents 6-30 Di2010/Di2510/Di3010/Di3510...
The copies are fed out and stacked on top of each other as they are printed. Sort The copies are automatically di- vided into the specified number of sets with each set containing a copy of each page. 7.1 Specifying Finishing Settings Di2010/Di2510/Di3010/Di3510...
Page 126
<Only when the finisher is installed> Corner Staple Copies printed with the “Sort” or “Group” setting are automatically stapled together in the upper-left corner. Note Thick paper, envelopes and over- head projector transparencies cannot be stapled. Di2010/Di2510/Di3010/Di3510...
Page 127
Holes are punched in the copies so they can be filed. This setting can be combined with the “Non-Sort”, “Sort”, “Group” or a staple setting. Note Holes cannot be punched in enve- lopes and overhead projector transparencies. 7.1 Specifying Finishing Settings Di2010/Di2510/Di3010/Di3510...
None of the following can be selected: a stapling or the “Hole Punch” setting and the “Page Insertion”, the “Cover Mode” and the “Image Repeat” functions. A paper drawer cannot be selected. Letter sized paper is set horizontally or vertically. If a finisher is installed, crisscross sorting can not be carried out. Di2010/Di2510/Di3010/Di3510...
7.1 Specifying Finishing Settings Shift Sorting Each copy set is fed out shifted to alternating sides. Crisscross Sorting Each copy set is fed out in an alternating crisscross pattern. Shift Grouping Each page set is fed out shifted to alternating sides. Di2010/Di2510/Di3010/Di3510...
For details, refer to “6 Original Documents”. Touch [Sort], and after selecting your desired sorting mode, touch staple mode. ❍ If “Corner Staple” was selected, skip to step 6. ❍ If “2-Point Staple” was selected, continue with step 3. Touch [Select Position]. Di2010/Di2510/Di3010/Di3510...
Page 131
When copying while using a stapling setting, be sure that the maximum number of pages that can be stapled together is not exceeded. Where you do not set the position, the stapling position is automatically speci- fied. 7.1 Specifying Finishing Settings Di2010/Di2510/Di3010/Di3510...
If copying is started without the hole punch position specified or if "OFF" was selected, the hole punch position is automatically specified according to the document orientation, as shown below. To adjust the position of the punched holes, contact your service represen- tative. Di2010/Di2510/Di3010/Di3510...
Creased and 2-point staple can be applied to Letter to 11 2 to 15 sheets of paper can be stabled. Only plain and recycled paper can be creased or 2-Point Stapled. 7-10 7.1 Specifying Finishing Settings × 17 L sized paper. Di2010/Di2510/Di3010/Di3510...
Document size: Letter C × Document size: 5-1/2 8-1/2C Document size: Letter or Legal L × Document size: 11 17 L Di2010/Di2510/Di3010/Di3510 Staple Position Scanning From the Original Glass Document size: Letter C Paper size: Letter C × Document size: 5-1/2...
Page 135
Document size: Letter L or 5-1/ Paper size: Letter C or × 8-1/2C 5-1/2 Document size: Letter L or Paper size: Letter L or Legal L Legal L × Document size: 11 17 L Paper size: 11 Di2010/Di2510/Di3010/Di3510 × 8-1/2C × 8-1/2C × 17 L...
When copying with the "Hole Punch" setting selected, be careful of the orientation of the document. When the finisher and punch kit are installed Screen Document Orientation Icon Feeding From the Duplexing Document Feeder Di2010/Di2510/Di3010/Di3510 × × Finisher (11 17 L to 5.5 8.5 C) 100 sets 80 sets...
❍ The zoom ratio of the “Minimal” setting can be changed to any ratio between × 0.900 and × 0.999. 7-14 7.2 Specifying a Zoom Setting Di2010/Di2510/Di3010/Di3510...
Use the 10-Key Pad to type in the desired zoom ratio (between × 0.250 and × 4.000). Touch [Enter]. The entered zoom ratio is displayed and is specified as the custom Zoom setting. Di2010/Di2510/Di3010/Di3510 to select the desired zoom ratio. Each time 7-15...
The entered zoom ratio is stored. To recall a stored custom zoom ratio Touch [Zoom]. A screen appears, showing the available Zoom settings. Touch [CustomZoom]. Touch [1], [2] or [Minimal]. Touch [Enter]. The entered zoom ratio is recalled. 7-16 7.2 Specifying a Zoom Setting Di2010/Di2510/Di3010/Di3510...
Use the 10-Key Pad to type in the desired length of side X (between × 0.250 and × 4.000). Use the 10-Key Pad to type in the desired length of side Y (between × 0.250 and × 4.000). Touch [Enter]. The entered zoom ratio is applied. Di2010/Di2510/Di3010/Di3510 7-17...
Orig. Ö Copy Settings Single-Sided Ö Single-Sided A single-sided copy is produced from a single-sided document. Single-Sided Ö Double-Sided <For the Di2010, the duplex unit and switchback unit are required> A double-sided copy is produced from two single-sided documents. Single-Sided Ö Single-2in1 A single-sided copy is produced from two single-sided documents.
Page 142
Single-Sided Ö Single-4in1 A single-sided copy is produced from four single-sided documents. Single-Sided Ö Double-4in1 <For the Di2010, the duplex unit and switchback unit are required> A double-sided copy is produced from eight single-sided docu- ments.
Page 143
Single-Sided Ö Booklet Creation <For the Di2010, the duplex unit and switchback unit are required> A double-sided copy is produced from four single-sided documents. Double-Sided Ö Single-4in1 <Only if the duplexing document feeder is installed> A single-sided copy is produced from two double-sided documents.
7.3 Selecting the Orig. > Copy Settings Book (Spreadsheet) Ö Double-Sid- <For the Di2010, the duplex unit and switchback unit are required> A double-sided copy is produced from a bound document. To specify Orig. Ö Copy settings Position the document(s) to be copied.
Page 145
❍ Select the desired type of copy, and touch [Enter]. Touch [Original Direction]. ❍ Select an Original Direction setting if the document is loaded in an orientation other than the standard. 7-22 7.3 Selecting the Orig. > Copy Settings Di2010/Di2510/Di3010/Di3510...
Page 146
7.3 Selecting the Orig. > Copy Settings Select the appropriate document orientation setting. Touch [Enter]. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 7-23...
Sided” or the “Double-Sided Ö Single-Sided” settings selected. Original Document Position the document(s) to be copied. ❍ For details, refer to “6 Original Documents”. Touch [Orig. Ö Copy]. Touch [Margin]. 7-24 7.3 Selecting the Orig. > Copy Settings Copy Di2010/Di2510/Di3010/Di3510...
Page 148
❍ The binding margin can be set between 0 in. and 3/4 in., in 1/ 16 in. increments. Touch [Enter]. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 Left binding position Top binding position 7-25...
Page 149
To adjust the width of the area erased from the bottom of the back side of the page, contact your service representative. 7-26 7.3 Selecting the Orig. > Copy Settings Original Document Copy Original Document Copy Di2010/Di2510/Di3010/Di3510...
(“Standard Book” or “RightBound”). Select whether to copy both pages of the book onto one sheet (“Spreadsheet”) or onto two separate sheets (“Separation”). To erase around the text or along the binding, touch [Book Erase]. Di2010/Di2510/Di3010/Di3510 Spread-sheet 7-27...
Page 151
The pages can be copied with a blank area along the binding. The pages can be copied with a blank area framing the text and along the binding. 7-28 7.3 Selecting the Orig. > Copy Settings Frame-erasing Center-erasing Center- & frame-erasing Di2010/Di2510/Di3010/Di3510...
Page 152
1/2 in. To change this default setting, consult your service representative. Touch [Enter]. Select the desired copy settings. Note If you touch [Book], you can not select [Single-2in1] or [4in1 / Booklet]. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 7-29...
Copy], and then touch [Book]. Select the appropriate setting for the binding position of the book (“Standard Book” or “RightBound”). Touch [Separation], and then touch [Enter]. Touch [Double-Sided]. Touch [Page Order]. 7-30 7.3 Selecting the Orig. > Copy Settings Di2010/Di2510/Di3010/Di3510...
Page 154
7.3 Selecting the Orig. > Copy Settings Select the setting for the desired page order, and then touch [Enter]. Book page order. Both the left and the right sides are double-sided. Press the [Start] key. The copies are printed. Di2010/Di2510/Di3010/Di3510 7-31...
The default settings can be changed using the various functions on the User’s Choice screen. For details, refer to “Changing Default Settings” of “Utility Mode Operations” in the Advanced Operations volume of the User Manual. 7-32 7.3 Selecting the Orig. > Copy Settings Di2010/Di2510/Di3010/Di3510...
The density is automatically adjusted for the document. Position the document(s) to be copied. ❍ For details, refer to “6 Original Documents”. Touch [Density]. Touch [Text]. Touch [Auto], or touch [Lighter] and [Darker] to select the desired Density setting. Di2010/Di2510/Di3010/Di3510 7-33...
Select the “Text/Photo” setting when copying documents containing both text and photos. Position the document(s) to be copied. ❍ For details, refer to “6 Original Documents”. Touch [Density]. Touch [Text/Photo]. Touch [Auto], or touch [Lighter] and [Darker] to select the desired Density setting. 7-34 7.4 Specifying a Copy Density Di2010/Di2510/Di3010/Di3510...
Page 158
However, the density can be made lighter or darker using a function on the User’s Choice screen. For details, refer to “Changing Default Settings” of “Utility Mode Operations” in the Advanced Operations volume of the User Manual. Di2010/Di2510/Di3010/Di3510 7-35...
Page 159
7.4 Specifying a Copy Density 7-36 Di2010/Di2510/Di3010/Di3510...
When the toner is nearly empty, the “Please add toner” message is displayed. After it is displayed, you can still print approximately 1000 pages, however please re- place the bottle as soon as possible. For details, refer to “To replace the toner bottle” on page 8-3. Di2010/Di2510/Di3010/Di3510...
When the toner is empty, the message shown below appears and printing can no longer be performed. Follow the procedure described below to replace the toner bottle. To replace the toner bottle Open the front door. Pull the toner hopper out as far as possible. Di2010/Di2510/Di3010/Di3510...
Page 163
4 or 5 times, and then hit the other end 4 or 5 times. ❍ Since the toner within the bottle may have become compacted, be sure to break it up by performing this step. 8.2 When the Message “Please add toner.” Appears Di2010/Di2510/Di3010/Di3510...
Page 164
With the seal on the toner bottle facing upward, insert the bottle. Flip down on the toner bottle holder until it locks into place. Grab the seal on the toner bottler, and then slowly pull it off toward you. Di2010/Di2510/Di3010/Di3510...
Page 165
If the print is faint immediately after the toner bottle is replaced, replenish the toner. (For more details, refer to User Management Functions of “Utility Mode Operations” in the Advanced Operations volume.) 8.2 When the Message “Please add toner.” Appears Di2010/Di2510/Di3010/Di3510...
Be sure to replace the staple cartridge only after the message appears. The ma- chine may be damaged if the staple cartridge is removed before the message appears. To replace the staple cartridge for finisher Open the front door. Di2010/Di2510/Di3010/Di3510...
Page 167
Pull the staple cartridge holder out toward you. Press in the area marked “PUSH” to unlock the staple holder. Remove the empty staple cartridge from the staple cartridge holder. 8.3 When the Message “Stapler empty.” Appears Di2010/Di2510/Di3010/Di3510...
Page 168
8.3 When the Message “Stapler empty.” Appears Insert the new staple cartridge into the staple cartridge holder, and then carefully remove the stopper. Insert the refilled staple cartridge holder until it locks into place. Close the front door. Di2010/Di2510/Di3010/Di3510...
While holding up the paper output tray, remove the staple cartridge. Press in the area marked “PUSH” to unlock the staple holder. Remove the empty staple cartridge from the staple cartridge holder. 8-10 8.3 When the Message “Stapler empty.” Appears Di2010/Di2510/Di3010/Di3510...
Page 170
Insert the refilled staple cartridge holder until it locks into place. CAUTION Be careful when installing the staple cartridge holder. ➜ Be sure that the staple cartridge holder is inserted facing the correct direction. Lower the paper output tray. Di2010/Di2510/Di3010/Di3510 8-11...
Page 171
Open then shut the misfeed- clearing door. 8-12 8.3 When the Message “Stapler empty.” Appears Di2010/Di2510/Di3010/Di3510...
(page 8-18) A paper misfeed in the multiple bypass tray (page 8-19) A paper misfeed in the 1st or 2nd paper drawer (page 8-20) Di2010/Di2510/Di3010/Di3510 Message Description A paper misfeed in the 3rd or 4th paper drawer (page 8-21) A paper misfeed in the large capacity...
Pull up the lever for the misfeed- clearing cover, and then open the cover. Carefully pull out any misfed documents. Swing up the document guide lever. Turn the dial to feed out any misfed documents. 8-14 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
Touching any part other those indicated may result in burns. If you get burnt, immediately cool the skin under cold water, and then seek professional medical attention. Pull up the right-side door release lever, and then open the right-side door. Di2010/Di2510/Di3010/Di3510 8-15...
Page 175
Decreased copy quality may result if the surface of the image transfer roller is touched. ➜ Be careful not to touch the surface of the image transfer roller. Carefully pull out any misfed paper. Open the fusing unit guide. 8-16 8.4 When a Paper Misfeed Occurs Image transfer roller Di2010/Di2510/Di3010/Di3510...
Page 176
If the paper is misfed as described below, contact your service representa- tive. - The paper is wrapped around the image transfer roller. - The paper is folded or shredded by the image transfer roller. - The paper that was removed tore and partly remains in the fusing unit. Di2010/Di2510/Di3010/Di3510 8-17...
Carefully pull out any misfed paper. Close the right-side door. To clear a paper misfeed in the duplex unit Open the duplex unit door. Carefully pull out any misfed paper. Close the duplex unit door. 8-18 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
Press down on the sliding plate with your left hand and carefully pull out any misfed paper. Return the multiple bypass tray to its original position. Di2010/Di2510/Di3010/Di3510 8-19...
Carefully pull out any misfed paper. Close the lower-right door. Close the multiple bypass tray. 8-20 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
To clear a paper misfeed in the 3rd or 4th paper drawer Pull up the lower-right door release lever to open the lower- right door of the paper feed unit indicated in the touch panel message. Carefully pull out any misfed paper. Close the lower-right door. Di2010/Di2510/Di3010/Di3510 8-21...
Pull up the lower-right door release lever to open the lower- right door of the paper feed unit indicated in the touch panel message. Carefully pull out any misfed paper. Close the lower-right door. 8-22 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
8.4 When a Paper Misfeed Occurs To clear a paper misfeed in the built in finisher Open the front door. Lower lever “FN1”, and then pull out any misfed paper. Turn knob “FN2”. Di2010/Di2510/Di3010/Di3510 8-23...
Page 183
Lower lever “FN3”, and then pull out any misfed paper. Return lever “FN1” and lever “FN3” to their original position. <If the punch kit is installed> Insert the punch box into its original position. Lower lever “FN4”. 8-24 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
Page 184
8.4 When a Paper Misfeed Occurs Turn dial “FN5” or dial “FN6”, and then pull out any misfed paper. Return lever “FN4” to its original position. Close the front door. Di2010/Di2510/Di3010/Di3510 8-25...
To clear a paper misfeed in the mail bin kit Open the front door. Turn dial “FN5” or dial “FN6”, and then pull out any misfed paper. While pressing down lever “FN7”, pull out any misfed paper. 8-26 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
Page 186
8.4 When a Paper Misfeed Occurs Pull handle “FN8” to open the misfeed-clearing door. Pull out any misfed paper in the mail bin. Close the misfeed-clearing door. Close the front door. Di2010/Di2510/Di3010/Di3510 8-27...
To clear a paper misfeed in the saddle kit Open the front door. Turn dial “FN5” or dial “FN6”, and then pull out any misfed paper. Remove all paper from the paper output tray. 8-28 8.4 When a Paper Misfeed Occurs Di2010/Di2510/Di3010/Di3510...
Page 188
8.4 When a Paper Misfeed Occurs Open the misfeed-clearing door, and then pull out any misfed paper. Close the misfeed-clearing door. Close the front door. Di2010/Di2510/Di3010/Di3510 8-29...
When the message “Cannot Staple.” appears, clear the jammed staples as de- scribed below. Not following the following procedure and forcefully pulling out the paper may result in damage to the “Stapler Unit”. Remove all paper from the finisher. 8-30 8.5 When the Message “Cannot Staple.” Appears Di2010/Di2510/Di3010/Di3510...
Page 190
8.5 When the Message “Cannot Staple.” Appears Open the front door. Lower lever “FN1”, and then pull out any misfed paper. Turn dial “FN2”. Di2010/Di2510/Di3010/Di3510 8-31...
Page 191
Return lever “FN1” and lever “FN3” to their original position. <If the punch kit is installed> Insert the punch box into its original position. Lower lever “FN4”. 8-32 8.5 When the Message “Cannot Staple.” Appears Di2010/Di2510/Di3010/Di3510...
Page 192
Turn dial “FN5” or dial “FN6”, and then pull out any misfed paper. Return lever “FN4” to its original position. Turn the dial to the left to move the stapler toward the front. Pull the staple cartridge holder out toward you. Di2010/Di2510/Di3010/Di3510 8-33...
Page 193
Insert the staple cartridge holder until it locks into place. Close the front door. Note If stapling still cannot be performed, even after performing the above proce- dure, contact your service representative. 8-34 8.5 When the Message “Cannot Staple.” Appears Di2010/Di2510/Di3010/Di3510...
If the punch kit is attached to the finisher, the following message will appear when the punch box is full. Follow the procedure described below to empty the punch box. To empty the punch box Empty and re-install the punch box as described below. Open the front door. Di2010/Di2510/Di3010/Di3510 8-35...
Page 195
8.6 When the Message “Hole Punch collection box is full.” Appears Pull out the punch box. Empty the punch box. Insert the punch box into its original position. Close the front door. 8-36 Di2010/Di2510/Di3010/Di3510...
The total amount of jobs to be Ask the administrator to clear printed as set by the the number of jobs to be administrator has been reached. printed. Di2010/Di2510/Di3010/Di3510 to display the code.
9.2 When Incorrect Copies Are Printed When Incorrect Copies Are Printed Symptom The printed output is too light. The printed output is too dark. The printed output is blurry. Di2010/Di2510/Di3010/Di3510 Possible Cause Remedy The “Auto” Density setting is Adjust the “Default Copy set too light.
Page 199
The paper that was used (as Remove the paper from the with recycled paper) curls paper drawer, turn it over, and easily. then load it again. Replace the paper with paper that is not damp. Di2010/Di2510/Di3010/Di3510...
Page 200
The edge of the printed output is dirty. * If the problem is not corrected even after the operations described above are performed, contact your service representative. Di2010/Di2510/Di3010/Di3510 Possible Cause Remedy The document pad is dirty. Clean the document pad with a soft cloth dampened with a mild detergent.
Interrupt mode. The power supply cord has Plug the power supply cord into been unplugged from the the electrical outlet. electrical outlet. The breaker for the electrical Close the breaker for the circuit has been tripped. electrical circuit. Di2010/Di2510/Di3010/Di3510...
Page 204
Double-4in1 ...7-19 Double-sided ...7-18 Drawer release button ...1-14 Duplex unit ...1-10 Duplex unit door ...1-10 Duplexing document feeder ...1-6 Duplexing document feeder connector ...1-11 Empty the punch box ...8-35 Energy save mode ...3-12 Enlarging the touch panel screens ...3-9 Di2010/Di2510/Di3010/Di3510 10-3...
Page 205
... 5-11 multiple bypass tray ... 5-12 paper drawer ... 5-10 Lower-right door ... 1-14 Lower-right door release lever ... 1-12 Mail bin ... 1-13 Mail bin kit ... 1-7 Making copies using accounts ... 4-6 10-4 10.1 Index 1-14 Di2010/Di2510/Di3010/Di3510...
Page 206
...8-14 finisher ...8-23 fusing section ...8-15 large capacity cabinet ...8-22 mail bin kit ...8-26 multiple bypass tray ...8-19 saddle kit ...8-28 Paper misfeeds locations ...8-13 Paper orientation ...1-4 Paper output tray ... 1-9 Di2010/Di2510/Di3010/Di3510 1-14 5-15 1-14 10-5...
Page 208
10.1 Index Switchback unit ...1-10 Touch panel ... 1-9 Tray extension ...1-9 Turning the copier on and off ...3-10 Useful operations ...2-2 X/Y zoom setting ...7-17 Zoom setting ...7-14 Di2010/Di2510/Di3010/Di3510 3-14 10-7...
Page 209
10.1 Index 10-8 Di2010/Di2510/Di3010/Di3510...
Page 210
Copyright 2003 MINOLTA CO., LTD. Printed in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. MINOLTA CO., LTD. 2003. 06 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan...