Minolta Di200f Operator's Manual page 87

3-20
4. Selecting the Finishing Function
Selecting the Finishing Function
Non-Sort
1
Touch [Non-Sort].
NOTE
Card and OHP transparencies cannot be used
for making copies in Staple and Punch.
Sort/Group
1
Touch [Sort] or [Group].
4017P028EA
NOTES
• Separate Scan will be automatically activated if
an original is place directly on the Original
Glass in the Sort mode.☞p.3-61
• If the machine is equipped with a Shift Tray,
Finisher, or Mailbin Finisher, copies are fed
out in a sawtooth manner. If the machine is
equipped with a Job Tray, or if it is not fitted
with a Shift Tray, Finisher, or Mailbin
Finisher, copies are fed out in a crisscross
manner.
• Crisscross sorting is possible only when all of
the following conditions are met:
• The machine is loaded with paper of the same
size, but in two different directions.
• The machine is loaded with paper of the same
type, but in two different directions.
• Mixed Original Detection is not set in Auto
Paper.
• None of the Staple, Hole Punch, Page
Insertion, Cover, or Image Repeat functions
are set.
• An original is placed on the Original Glass,
while drawer is yet to be selected.
4017P029EA