9-32
9. Settings for Report Settings
Report Settings
This function allows the administrator to set the various functions concerning reports.
TX Report
Select the print condition for reports used to verify
the results of fax transmission. Options are
"Output ON," "If TX Fail," and "Output OFF."
The factory setting is "If TX Fail."
Activity Report
Select whether to automatically print the activity
report every 50 communications ("Output ON") or
not ("Output OFF").
The factory setting is "Output ON."
Report Settings Procedures
1
For how to show the [Report Settings] key,
see "Setting Admin. Management." ☞p.9-2
2
Touch [Report Settings].
3
Select the function to be set.
Report Screen
Select whether to print on the status report a copy
of the transmitted document image ("ON") or not
("OFF").
The factory setting is "ON."
Memory Clear Report
Select whether to print a report to show that some
documents have been cleared due to a power
failure or other reason ("Output ON") or not
("Output OFF").
The factory setting is "Output ON."
<For "TX Report">
Touch the appropriate key.
Useful Tip
4016P480CA
The same procedure applies to "Report Screen,"
"Activity Report," and "Memory Clear Report."
4
Touch [Enter].
4016P481CA
4016P482CA