Minolta Di200f Operator's Manual page 358

Symptom
The image on the copy is not
aligned properly.
1074O113
* Call your Technical Representative if these procedures do not correct the problem.
Possible Cause
The original is not placed in the
correct position.
The originals may not be suitable
for use in the document feeder.
Something is sticking to the
Original Glass (When the document
feeder is used).
The document guides are not
positioned along the edges of the
paper.
Curled paper was loaded into the
paper drawer.
11. When This Type of Copy is Produced
Action
Place the original correctly on the
Original Glass against the Original
Width Scale. ☞p.2-30
Or, load it in the document feeder
correctly along the Document
Guide Plates. ☞p.2-27
Raise the document feeder and
place the originals on the Original
Glass one at a time, instead of using
the document feeder. ☞p.2-30
Wipe the Original Glass clean with
a soft dry cloth. ☞p.11-10
Slide the document guides against
the edges of the paper.
Flatten the paper before loading it.
10-45