Minolta Di200f Operator's Manual page 57

2-28
5. Placing the Original
Duplexing Document Feeder
1
Slide the Document Guide Plate to the size of
the originals.
2
Neatly load stack of originals face up on the
Document Feed Tray.
NOTES
• The maximum number of originals that can be
loaded is 50.
• The machine can scan a document consisting of
50 or more pages at one time.☞p.3-61
• Make sure that the top level of the original
stack does not exceed the ▼ marking.
• Make sure that the Document Guide Plate is
touching the edges of the original stack. If it's
not pressed snugly against the original stack,
skewed feeding could result.
• You can make copies automatically from
originals of assorted sizes loaded in the
Duplexing Document Feeder.☞p.2-32
NOTES
• When loading the original in the Duplexing
Document Feeder, load it in the direction shown
below.
1166O021AA
• If you need to load your original in a direction
4015O244AA
different from these examples, set "Original
Direction" on the Touch Panel. ☞p.3-35
• To send a facsimile, load the original in the
Duplexing Document Feeder so that its longer
side is placed against the Document Guide
Plate. If the original is loaded with its shorter
side against the Document Guide Plate, the
receiving party may receive it in a reduced size.
3
Press the Start key. The originals will be fed
into the Duplexing Document Feeder,
starting with the top page.
NOTE
The machine may fail to read the areas of 1/2
inch margins on top, bottom, right, and left edges
of the original if it is to be sent by facsimile.
P
P
4015O041AB
4015O042AB
4015O267EA