Highly Transparent Originals - Minolta Di200f Operator's Manual

Highly Transparent Originals

<Using transparencies and translucent paper for
the original>
1
Place the original in the same way as the
sheet originals.
2
Place a blank sheet of paper of the same size
over the original.
3
Gently lower the Original Cover (document
feeder).
Making Copies from a Book Using
Book Copy Mode
<When placing an open book or magazine>
1
Place the open book so that its top edge is at
the rear of the machine and the center of the
book is aligned with the Book Marker
indicated on the Original Length Scale.
Blank
Sheet of
Paper
Original Length Scale
1166O028AA
2
Gently lower the Original Cover.
NOTES
• If the original is thick, scan the data with the
Original Cover raised.
• Do not look directly at the Original Glass
surface during a scanning sequence, since a
strong beam of light is emitted.
• Not positioning the open book properly will
result in copies with pages in incorrect order.
• Be sure to raise the Original Cover 15° or more
before placing the original. If the Original
Cover is raised to an angle less than 15°, the
machine may fail to select the correct paper
size or zoom ratio.
• Do not place an original weighing more than 6-
1/2 lb on the Original Glass.
• When placing an open book, do not press the
book hard on the Original Glass, as trouble
could result.
2-31
5. Placing the Original
4015O049AB
Book Marker
1166O186AA
°
15
1166O187AA