Minolta Di200f Operator's Manual page 65

2-36
6. Auxiliary Functions
Auto-Mode Screen
This screen can be used for both facsimile and
copying without specifying which function is to be
used.
The machine determines the copying or facsimile
function by the number of digits entered from the
10-Key Pad.
Di200f/Di251f:
If the number entered is 2 digits or less,
the machine considers that it is the
number of copies to be made and starts a
copy cycle.
If the number entered is 3 digits or more,
the machine considers that it is a fax
number and sends the document by
facsimile.
Di351f:
If the number entered is 3 digits or less,
the machine considers that it is the
number of copies to be made and starts a
copy cycle.
If the number entered is 4 digits or more,
the machine considers that it is a fax
number and sends the document by
facsimile.
The Function Display shows the copying program
key [1] and facsimile one-touch keys [1] to [4],
allowing you to directly set the facsimile or
copying function.
Pressing the Copy key or Fax/Scan key on the
control panel will allow you to select the
corresponding screen, either Copy or Fax.
One-Touch Dialing
Frequently called numbers can be programmed for
one-touch dialing, which allows you to specify the
destination number by simply touching the
corresponding one-touch key.
"Using One-Touch Dialing for Transmission."
☞p.5-6
Activity List
The Activity List is available on the screen,
allowing you to check the results and status of the
documents that are reserved for transmission,
being transmitted, and that have been transmitted,
as well as the documents received. "Activity List"
☞p.5-24
4017P345EA