Minolta Di200f Operator's Manual page 288

Programming the Access Code
The account code can be programmed or changed only when "100 Accounts 1" or "100 Accounts 2" is
selected.
1
To display [Copy Track] on the Touch Panel,
follow the steps given in "Setting Admin.
Management." ☞p.9-2
2
Touch [Copy Track].
3
Touch [Copy Track Data].
4
Select the page number on which the target
account is shown.
5
Touch the [Access Code] key of the target
account.
6
Enter the access code from the 10-Key Pad.
Touch [Enter].
4016P150CA
4016P154CA
NOTES
• The access code must be a 4-digit number.
• If a new access code is programmed, the old
one will be erased.
• If a new access code entered already exists for
another account, the entry will be rejected:
Enter a different access code.
Useful Tips
• If you have entered an incorrect number, press
the Clear key, then enter the correct number.
• If you want to program an access code for
another account, repeat steps 4 through 6.
4017P155EA
7
Touch [Exit].
9-9
3. Settings for Copy Track
4016P157CA
1166O030AA