Table of Contents
Advertisement
10-30
5. When the Message "Misfeed detected." Appears
Mailbin Finisher
1
Holding the Grip, slide the Mailbin Finisher
away from the machine
2
Open the Transport Unit Cover and remove
the sheet of paper.
NOTE
Be careful about a protrusion on the backside of
the Transport Unit Cover. It can hurt you!
3
Slowly close the Transport Unit Cover until a
click is heard.
.
4015O102AB
4015O103AB
4015O104AB
4
Open Misfeed Clearing Guide [FN2].
CAUTION
Metallic parts inside Misfeed Clearing
Guide FN2 are very hot.
Do not touch anything but the paper to
prevent you from getting burned.
5
If "Hole Punch" has been set, turn the Hole
Punch Adjustment Dial ten times downward.
Pull out the sheet of paper.
6
Open Misfeed Clearing Guide [FN3] and
pull out the sheet of paper.
FN3
FN2
4015O105AA
4015O106AA
4015O107AA
Advertisement
Table of Contents
