Defining The Area Of Document To Be Scanned For Transmission - Minolta Di200f Operator's Manual

5-14
2. Sending Documents

Defining the Area of Document to be Scanned for Transmission

A specific area of the document to be scanned may be defined for transmission.
This comes in handy for such needs as sending only part of a large document or sending a document of a
nonstandard size in a standard size (Letter, Legal L, etc.).
Selecting the Scanning Area
1
Load the document.
2
Touch [Quality & Reduction].
3
Touch [Reduction/Area].
4
Touch [Scan Area].
5
Select the size of the scanning area of the
document.
4016P260CA
NOTES
• When [Auto Detect.] is touched, the machine
will automatically set the scanning area to a
standard size according to the document size.
• When the document is placed manually on the
Original Glass, specify the size by referring to
the markings made on the Original Scales of
the Original Glass.
4016P265CA
Example: Letter L
6
Set the destination.
7
Press the Start key.
4016P266CA
4017P267EA
4015O268EA