Paper Size Input (For 23 Cpm Copier Only - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09

(9) Paper Size Input (For 23 cpm Copier Only)

• This function allows the Tech. Rep. to enter the size of the paper loaded in each drawer
(except the 1st Drawer which is a Universal Tray).
<Setting Procedure>
1. Select the Paper Size Input function.
2. Each press of the Paper Select key shows a new paper size in the following order.
Order Zoom Ratio Indicator
1
2
3
4
Current paper size
5
6
7
8
NOTE
For PF-112, use 3F and 3C for the size input.
3. Show the paper size to be set and press the Clear key to clear the current size.
4. From the 10-Keys, enter the new paper size.
(10) Display
• This function is used to check the time it takes the copier to complete different functions
and to make a control panel display test and sensor check.
<Setting Procedure>
1. Select the Display function.
2. From the 10-Keys, enter the number (0, 1, 2, 6, or 7) corresponding to the item to be
checked/set.
Display Function
d0
The warm-up time is shown on the Zoom Ratio Indicator
d1
The first copy time is shown on the Zoom Ratio Indicator
d2
The multiple copy time is shown on the Zoom Ratio Indicator
d6 All LEDs on the control panel are turned ON and OFF (blinking) for
checking operations.
When a misfeed or malfunction occurs, this function is used to make a
sensor check to isolate the possible faulty spot.)
d7
NOTE
For details, see TROUBLESHOOTING.
Multi-Copy Display
2F 2nd Drawer length
2C 2nd Drawer width
3rd Drawer (Paper Feed Cabinet)
3F
length
3rd Drawer (Paper Feed Cabinet)
3C
width
4th Drawer (Paper Feed Cabinet)
4F
length
4th Drawer (Paper Feed Cabinet)
4C
width
5F (Japan Only)
5C (Japan Only)
[Service Mode Display]
Setting
<Warm-up time>
<First copy time>
<Multiple copy time>
<Display test>
<Sensor check>
S-30
Description