Minolta Di200f Operator's Manual page 292

Func.
Priority Screen
<Priority Screen>
Select the default setting of the standby screen
from among "Copier," "FAX," and "Auto."
The factory setting is "Copier."
<Priority FAX Screen>
Select the default screen that will appear when the
Fax/Scan key is pressed from among "One-
Touch," "Abbr. #," "10-Key Dialing," and "Index,"
according to how the machine is used.
The factory setting is "One-Touch."
Received Document
Select how a document received in a mailbox is to
be handled, from among "Print," "Forwrd," "Prt &
Forwrd," "Save to Box," and "Move."
The factory setting is "Save to Box."
TX1
Priority Quality
Select the default setting of the image quality from
among "Standard," "Fine," "Super Fine," "Text +
Photo," "GSR," and "Super GSR."
The factory setting is "Standard."
Priority Contrast
Select the default setting of contrast from among
five levels which will be made available by
touching [Lighter], [Normal], or [Darker].
The factory setting is "Normal."
Com. Mode
<Only when G3 MULTIPORT SERIES 2 is
mounted>
Choose the default setting of the communication
mode between "G3-1" and "G3-2."
The factory setting is "G3-1."
4. Settings for Input Accounts
TX2
TX
<Only when the Automatic Document Feeder is
mounted>
Choose the default setting of the transmission
method between "Memory TX" and "Real-Time."
The factory setting is "Memory TX."
TSI
Select whether or not to put TSI on the transmitted
document, or where to put it, either inside or
outside the image area. Options are "On The Doc."
(inside the image area), "Out of Doc." (outside the
image area), and "OFF" (not printed).
The TSI is required on all facsimile transmissions.
It is unlawful to turn this feature off. ☞p.viii
The factory setting is "On The Doc."
TX Marker
<Only when TX Marker STAMP UNIT is
mounted on the Automatic Document Feeder>
Select whether or not to put TX Marker on the
transmitted document, or where to put it, either at
the bottom edge only or at the top and bottom
edges. Options are "Bottom," "Top & Bottom,"
and "OFF" (not printed).
The factory setting is "OFF."
Output
TX Report
Select the print condition for reports used to verify
the results of fax transmission. Options are
"Output ON," "If TX Fail," and "Output OFF."
The factory setting is "If TX Fail."
Report Screen
Select whether to print on the status report a copy
of the transmitted document image ("ON") or not
("OFF").
The factory setting is "ON."
Max. Print Page
Limit the number of pages to be printed for each
account in the range from 0 to 999,999.
9-13