Minolta Di200f Operator's Manual page 328

Mailbin Finisher
1
Press and turn the knob and open the cover at
the rear of the Finisher.
2
Slide out the Staple Unit.
3
While pressing down the green lever, pull out
the Staple Cartridge.
4
Remove the empty staple clip from the
Staple Cartridge.
3. When the Message "Stapler empty." Appears
5
Load a new staple clip into the Staple
Cartridge and carefully peel off the Seal.
4015O120AA
6
Insert the Staple Cartridge into the Staple
Unit until it clicks into place.
1166O127AA
7
Align the arrows and firmly push the Staple
Unit down into the well.
1166O128AA
8
Press and turn the knob to lock the cover.
4002O340AA
10-15
Stopper Seal
4002O341AA
1166O130AB
1166O131AB
4015O121AA