Table of Contents
Advertisement
6.
Specify the destination.
• 10-Key Dialing: Enter the facsimile number of the destination. ☞p.5-4
• One-Touch Dialing: Touch the one-touch key corresponding to the destination. ☞p.5-6
• Abbreviated Dialing: Enter the abbreviated dialing number preprogrammed for the destination.
☞p.5-7
• Facsimile Program Dialing: Touch the facsimile program key in which the destination and the
transmission functions have previously been programmed. ☞p.5-8
• Chain Dialing: Touch a one-touch dialing key in combination with others to set a single
destination. ☞p.5-16
* Set the communication mode as may be necessary depending on the fax machine of the
receiving party. ☞p.5-18
* If you have made a wrong setting, press the Clear key and then make the correct setting.
7.
Press the Start key.
When you press the Start key, the machine will start
transmitting the document.
* You can make sure that the destination you've set is
correct while the document is being sent or put in a
queue for transmission. ☞p.2-33
* To stop transmission in mid-operation, press the
Stop key. "Quitting an Operation" ☞p.2-37
The machine emits a "beep" as it completes transmitting the document successfully.
If the document has not been successfully transmitted, the machine prints a transmission report.
☞p.5-19, 9-32
Useful Tip
The number of document pages the machine can scan and store in memory is about 400 for Di200f and
about 1,400 for Di251f/Di351f based on Letter standard pages with a normal contrast. If optional
Memory is mounted, it expands this storage capacity.
5-3
1. Using the Facsimile
1166O244EA
Advertisement
Table of Contents
